OUR PRODUCTS
Kungber DC Power Supply Variable with Memory, 120V 3A Adjustable Switching Regulated DC Bench Linear Power Supply with Memory Recall and Output Disable Button 4 Digits Display and Alligator Leads
$119.90
- Easier to Set Values - Encoder switch is used on Kungber dc power supply 2021 version to replace the potentiometer switch which is widely used but not easy to adjust. On this version you can just “set” Voltage and Current instead of “adjust”. Make works accuracy, easy and fast.
- 4 Groups of Internal Memories - You can set 4 groups of commonly used Voltage and Current combination and easily recall them by press “M1-M4”. Use the “ADJUST” knob to set new combinations.
- Output Switch Control - Sometimes we need to switch between different voltage or current outputs, but we often forget to unplug the previous instrument and cause to burn out, which often occurs in the maintenance. Output switch is designed to solve this problem. By pressing the On/Off key, the required voltage and current can be adjusted without the actual output power, which makes this benchtop DC power supply more secure and more energy efficient.
- Reliable and Safety - Kungber variable power supply use premium electronic components, provide reliable working status and prolong the product life effectively. Many safety measures are adopt in Kungber power supply- Grounding wire, Leakage protection, Thermal protection, Voltage overload, Power overload and Short-circuit protection. When the working temperature is more than 122℉/50℃, the intelligent thermal protection will activate the cooling fan to lower the temperature according to the load.
- Compact and Various Application - This DC power supply is less than 3 lb and measures only 9.9 x 3.3 x 6.7 inches, with a high resolution of 0.1V and 0.001A, led 4 digits display. You can easily tune it within 0-120V and 0-3A, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements.
RS-550s 18v (12v – 20 Volts) DC Motor Round Shaft – High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicals, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine
$15.49
- RS-550s Brushed DC Motor Weight: ~7.7oz (218g) Body Length: 2.24in (57mm) Body Diameter: 1.46in (37.5mm)
- Operating Voltage: ~6v - 20v | Optimal Volt Range: 12v - 18v | 18 Volt Nominal (Optimal Power, Speed, and Torque near 18 volts)
- Shaft Length ~0.35 inch / ~11/32in or ~9mm | Diameter ~0.125 inch / 1/8in or ~3.175mm | Style: Round | Stall Current: ~85A | Efficiency: ~70% | No Load RPM: ~20000 rpms | RPM Peak Efficiency: ~17000 rpms
- Designed as a Power Tool Drill motor and may replace motors in many 3/8in drills and other cordless and outdoor tools. Popular choice for DIY Electronics and Robotics, PowerWheels, and some Gate Openers. Will not work or fit in all models, be sure to check your specific applications requirements before purchasing
- PLEASE NOTE: If your replacing a motor please be sure to verify the motor matches your dimensions and shaft length and diameter before purchasing.
Electronics-Salon Slim DIN Rail Mount 30A/60V 6-Position Power Distribution Block Module, for Power Pole Connectors
$22.99
- Slim DIN Rail Mount 30A/60V 6-Position Power Distribution Block Module, for Power pole Connectors.
- Connections: 6 standard power pole connectors. Can compatible 15A, 30A or 45A power pole connectors.
- Maximum Voltag: 60VDC.
- Maximum Current: 30A.
- High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm, 25mm or 15mm rail.
40Amp DC Power Splitter Distribution Module, 5 Power Pole Ports and 6 USB Ports Output
$98.00
- Input: Operating voltage 8.5 to 32VDC. Maximum input current 40 Amp, fuse 40 Amp. No-load quiescent current: less than 8mA(at 13.8V).
- Power pole output ports: 5 output ports, 1*30Amp 1*20Amp 1*10Amp 1*5Amp 1*3Amp, you can replace these fuses, but the maximum output current of each port is 30Amp, total maximum output current 40Amp.
- USB output ports: 6 USB output ports, output voltage 5VDC, output maximum current 2.4Amp for each port. Support dual ports parallel output 4.8Amp. Support USB DCP BC1.2 protocol, support Apple and Samsung protocol. The conversion efficiency of the internal circuit is greater than 90%.
- With power indicator LED, with fault indicator LED for each fuse. High-quality fuse holders, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40 Amp.
- Enclosure: High quality aluminum enclosure, thickness 1.5mm / 0.06". Support screw mount, wall mount, of course can also be placed on the desktop. If you purchase together our CASE-015 DIN adapter bracket, it can also be support 35mm, 32mm or 15mm DIN rail mounting.
Smart PDU – IP Remote Reboot Power, 4 Switched NEMA 5-15R Outlets
$445.00
- ENTERPRISE LEVEL IP AUTHENTICATION – Our GSM power switch and remote power switch has Active Directory (AD), Lightweight Directory Access Protocol (LDAPv3 / LDAPS), REMOTE ACCESS Dial-In User Service (RADIUS) protocol, or local credential database. Strong passwords and granular user/user group permissions. Supports high-speed network IP via Gigabit IP LAN port - RACKMOUNT and SURFACE MOUNT
- SAVE MANPOWER & TRAVEL COSTS > With our remote IP switch, Restart the problem device by remotely power on & off, MiniBoot allow user to recover the equipment via network IP. > Reduce manpower and travel costs by negating the need for staff to actually be at the equipment location, improving uptime and productivity.
- POWER MONITORING VIA NETWORK & LOCAL METER > Our remote network monitoring Allows remote monitoring via the free Graphic User Interface (GUI). > Provides local current monitoring via MiniBoot blue LED ammeter. > Allows user to establish the remaining capacity prior to adding a new device to the MiniBoot, plus displays the current being drawn and receives threshold alerts remotely.
- REMOTE MANAGEMENT > Simultaneous access via web IP power switch GUI. > SNMP V2 / V3 integration to DCIM. > Remote management protocols: HTTP(S); SSH Command Line Interface; Telnet; SMTP; IPv6/IPv4.
- ALERTS / ALARMS > Receive alerts via SNMP, email (SMTP), and syslog when predefined thresholds are exceeded for both MiniBoot and environmental sensor events. > Common SNMP MIBs (Management Information Base) for all MiniBoot models. Sensors & Wi-Fi > Variety of optional sensors: Temperature & Humidity, Temperature, Smoke, Door. > Option to connect via a Wi-Fi kit (IPD-WIFI) complying with 802.11 g/n/ac.
GE Pro 6-Outlet Surge Protector, 4 Ft Extension Cord, 840 Joules, Power Strip, Flat Plug, Integrated Circuit Breaker, Wall Mount, UL Listed, Black, 37051
$9.88
- Expanded Power – Each extension cord comes in a black finish and features 6 grounded AC outlets to provide power from a distance — perfect for creating a centralized hub for your electronics at your home office workshop or garage
- Versatile Cord – Extra-long 4ft power cord comprised of heavy-duty cable housed in a durable PVC insulation and jacket is strong enough to last a lifetime and pliable enough to easily fully extend The space-saving design of the flat plug is engineered to allow the power cord to sit close to the wall
- Protection — Featuring a surge protection rating of 840 Joules an integrated circuit breaker with reset switch and automatic shutdown technology this extension cord is the ultimate in protection from voltage spikes and circuit overloads
- Functionality – Included keyhole slots make this unit easy to mount to a desk table or counter A reset switch puts power at your fingertips for easy control of your electronics
- Trusted Brand – GE is the #1 Brand in surge protection and extension cords This unit is UL listed with a hassle-free limited-lifetime replacement policy for peace of mind that your device is backed by the highest industry standards of performance and safety
Sale products
SPECIAL OFFERS
Kungber DC Power Supply Variable with Memory, 120V 3A Adjustable Switching Regulated DC Bench Linear Power Supply with Memory Recall and Output Disable Button 4 Digits Display and Alligator Leads
$119.90
- Easier to Set Values - Encoder switch is used on Kungber dc power supply 2021 version to replace the potentiometer switch which is widely used but not easy to adjust. On this version you can just “set” Voltage and Current instead of “adjust”. Make works accuracy, easy and fast.
- 4 Groups of Internal Memories - You can set 4 groups of commonly used Voltage and Current combination and easily recall them by press “M1-M4”. Use the “ADJUST” knob to set new combinations.
- Output Switch Control - Sometimes we need to switch between different voltage or current outputs, but we often forget to unplug the previous instrument and cause to burn out, which often occurs in the maintenance. Output switch is designed to solve this problem. By pressing the On/Off key, the required voltage and current can be adjusted without the actual output power, which makes this benchtop DC power supply more secure and more energy efficient.
- Reliable and Safety - Kungber variable power supply use premium electronic components, provide reliable working status and prolong the product life effectively. Many safety measures are adopt in Kungber power supply- Grounding wire, Leakage protection, Thermal protection, Voltage overload, Power overload and Short-circuit protection. When the working temperature is more than 122℉/50℃, the intelligent thermal protection will activate the cooling fan to lower the temperature according to the load.
- Compact and Various Application - This DC power supply is less than 3 lb and measures only 9.9 x 3.3 x 6.7 inches, with a high resolution of 0.1V and 0.001A, led 4 digits display. You can easily tune it within 0-120V and 0-3A, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements.
RS-550s 18v (12v – 20 Volts) DC Motor Round Shaft – High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicals, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine
$15.49
- RS-550s Brushed DC Motor Weight: ~7.7oz (218g) Body Length: 2.24in (57mm) Body Diameter: 1.46in (37.5mm)
- Operating Voltage: ~6v - 20v | Optimal Volt Range: 12v - 18v | 18 Volt Nominal (Optimal Power, Speed, and Torque near 18 volts)
- Shaft Length ~0.35 inch / ~11/32in or ~9mm | Diameter ~0.125 inch / 1/8in or ~3.175mm | Style: Round | Stall Current: ~85A | Efficiency: ~70% | No Load RPM: ~20000 rpms | RPM Peak Efficiency: ~17000 rpms
- Designed as a Power Tool Drill motor and may replace motors in many 3/8in drills and other cordless and outdoor tools. Popular choice for DIY Electronics and Robotics, PowerWheels, and some Gate Openers. Will not work or fit in all models, be sure to check your specific applications requirements before purchasing
- PLEASE NOTE: If your replacing a motor please be sure to verify the motor matches your dimensions and shaft length and diameter before purchasing.
Electronics-Salon Slim DIN Rail Mount 30A/60V 6-Position Power Distribution Block Module, for Power Pole Connectors
$22.99
- Slim DIN Rail Mount 30A/60V 6-Position Power Distribution Block Module, for Power pole Connectors.
- Connections: 6 standard power pole connectors. Can compatible 15A, 30A or 45A power pole connectors.
- Maximum Voltag: 60VDC.
- Maximum Current: 30A.
- High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm, 25mm or 15mm rail.
40Amp DC Power Splitter Distribution Module, 5 Power Pole Ports and 6 USB Ports Output
$98.00
- Input: Operating voltage 8.5 to 32VDC. Maximum input current 40 Amp, fuse 40 Amp. No-load quiescent current: less than 8mA(at 13.8V).
- Power pole output ports: 5 output ports, 1*30Amp 1*20Amp 1*10Amp 1*5Amp 1*3Amp, you can replace these fuses, but the maximum output current of each port is 30Amp, total maximum output current 40Amp.
- USB output ports: 6 USB output ports, output voltage 5VDC, output maximum current 2.4Amp for each port. Support dual ports parallel output 4.8Amp. Support USB DCP BC1.2 protocol, support Apple and Samsung protocol. The conversion efficiency of the internal circuit is greater than 90%.
- With power indicator LED, with fault indicator LED for each fuse. High-quality fuse holders, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40 Amp.
- Enclosure: High quality aluminum enclosure, thickness 1.5mm / 0.06". Support screw mount, wall mount, of course can also be placed on the desktop. If you purchase together our CASE-015 DIN adapter bracket, it can also be support 35mm, 32mm or 15mm DIN rail mounting.
Smart PDU – IP Remote Reboot Power, 4 Switched NEMA 5-15R Outlets
$445.00
- ENTERPRISE LEVEL IP AUTHENTICATION – Our GSM power switch and remote power switch has Active Directory (AD), Lightweight Directory Access Protocol (LDAPv3 / LDAPS), REMOTE ACCESS Dial-In User Service (RADIUS) protocol, or local credential database. Strong passwords and granular user/user group permissions. Supports high-speed network IP via Gigabit IP LAN port - RACKMOUNT and SURFACE MOUNT
- SAVE MANPOWER & TRAVEL COSTS > With our remote IP switch, Restart the problem device by remotely power on & off, MiniBoot allow user to recover the equipment via network IP. > Reduce manpower and travel costs by negating the need for staff to actually be at the equipment location, improving uptime and productivity.
- POWER MONITORING VIA NETWORK & LOCAL METER > Our remote network monitoring Allows remote monitoring via the free Graphic User Interface (GUI). > Provides local current monitoring via MiniBoot blue LED ammeter. > Allows user to establish the remaining capacity prior to adding a new device to the MiniBoot, plus displays the current being drawn and receives threshold alerts remotely.
- REMOTE MANAGEMENT > Simultaneous access via web IP power switch GUI. > SNMP V2 / V3 integration to DCIM. > Remote management protocols: HTTP(S); SSH Command Line Interface; Telnet; SMTP; IPv6/IPv4.
- ALERTS / ALARMS > Receive alerts via SNMP, email (SMTP), and syslog when predefined thresholds are exceeded for both MiniBoot and environmental sensor events. > Common SNMP MIBs (Management Information Base) for all MiniBoot models. Sensors & Wi-Fi > Variety of optional sensors: Temperature & Humidity, Temperature, Smoke, Door. > Option to connect via a Wi-Fi kit (IPD-WIFI) complying with 802.11 g/n/ac.
ACCESSORIES
Kungber DC Power Supply Variable with Memory, 120V 3A Adjustable Switching Regulated DC Bench Linear Power Supply with Memory Recall and Output Disable Button 4 Digits Display and Alligator Leads
$119.90
- Easier to Set Values - Encoder switch is used on Kungber dc power supply 2021 version to replace the potentiometer switch which is widely used but not easy to adjust. On this version you can just “set” Voltage and Current instead of “adjust”. Make works accuracy, easy and fast.
- 4 Groups of Internal Memories - You can set 4 groups of commonly used Voltage and Current combination and easily recall them by press “M1-M4”. Use the “ADJUST” knob to set new combinations.
- Output Switch Control - Sometimes we need to switch between different voltage or current outputs, but we often forget to unplug the previous instrument and cause to burn out, which often occurs in the maintenance. Output switch is designed to solve this problem. By pressing the On/Off key, the required voltage and current can be adjusted without the actual output power, which makes this benchtop DC power supply more secure and more energy efficient.
- Reliable and Safety - Kungber variable power supply use premium electronic components, provide reliable working status and prolong the product life effectively. Many safety measures are adopt in Kungber power supply- Grounding wire, Leakage protection, Thermal protection, Voltage overload, Power overload and Short-circuit protection. When the working temperature is more than 122℉/50℃, the intelligent thermal protection will activate the cooling fan to lower the temperature according to the load.
- Compact and Various Application - This DC power supply is less than 3 lb and measures only 9.9 x 3.3 x 6.7 inches, with a high resolution of 0.1V and 0.001A, led 4 digits display. You can easily tune it within 0-120V and 0-3A, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements.
RS-550s 18v (12v – 20 Volts) DC Motor Round Shaft – High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicals, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine
$15.49
- RS-550s Brushed DC Motor Weight: ~7.7oz (218g) Body Length: 2.24in (57mm) Body Diameter: 1.46in (37.5mm)
- Operating Voltage: ~6v - 20v | Optimal Volt Range: 12v - 18v | 18 Volt Nominal (Optimal Power, Speed, and Torque near 18 volts)
- Shaft Length ~0.35 inch / ~11/32in or ~9mm | Diameter ~0.125 inch / 1/8in or ~3.175mm | Style: Round | Stall Current: ~85A | Efficiency: ~70% | No Load RPM: ~20000 rpms | RPM Peak Efficiency: ~17000 rpms
- Designed as a Power Tool Drill motor and may replace motors in many 3/8in drills and other cordless and outdoor tools. Popular choice for DIY Electronics and Robotics, PowerWheels, and some Gate Openers. Will not work or fit in all models, be sure to check your specific applications requirements before purchasing
- PLEASE NOTE: If your replacing a motor please be sure to verify the motor matches your dimensions and shaft length and diameter before purchasing.
Electronics-Salon Slim DIN Rail Mount 30A/60V 6-Position Power Distribution Block Module, for Power Pole Connectors
$22.99
- Slim DIN Rail Mount 30A/60V 6-Position Power Distribution Block Module, for Power pole Connectors.
- Connections: 6 standard power pole connectors. Can compatible 15A, 30A or 45A power pole connectors.
- Maximum Voltag: 60VDC.
- Maximum Current: 30A.
- High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm, 25mm or 15mm rail.
40Amp DC Power Splitter Distribution Module, 5 Power Pole Ports and 6 USB Ports Output
$98.00
- Input: Operating voltage 8.5 to 32VDC. Maximum input current 40 Amp, fuse 40 Amp. No-load quiescent current: less than 8mA(at 13.8V).
- Power pole output ports: 5 output ports, 1*30Amp 1*20Amp 1*10Amp 1*5Amp 1*3Amp, you can replace these fuses, but the maximum output current of each port is 30Amp, total maximum output current 40Amp.
- USB output ports: 6 USB output ports, output voltage 5VDC, output maximum current 2.4Amp for each port. Support dual ports parallel output 4.8Amp. Support USB DCP BC1.2 protocol, support Apple and Samsung protocol. The conversion efficiency of the internal circuit is greater than 90%.
- With power indicator LED, with fault indicator LED for each fuse. High-quality fuse holders, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40 Amp.
- Enclosure: High quality aluminum enclosure, thickness 1.5mm / 0.06". Support screw mount, wall mount, of course can also be placed on the desktop. If you purchase together our CASE-015 DIN adapter bracket, it can also be support 35mm, 32mm or 15mm DIN rail mounting.
Smart PDU – IP Remote Reboot Power, 4 Switched NEMA 5-15R Outlets
$445.00
- ENTERPRISE LEVEL IP AUTHENTICATION – Our GSM power switch and remote power switch has Active Directory (AD), Lightweight Directory Access Protocol (LDAPv3 / LDAPS), REMOTE ACCESS Dial-In User Service (RADIUS) protocol, or local credential database. Strong passwords and granular user/user group permissions. Supports high-speed network IP via Gigabit IP LAN port - RACKMOUNT and SURFACE MOUNT
- SAVE MANPOWER & TRAVEL COSTS > With our remote IP switch, Restart the problem device by remotely power on & off, MiniBoot allow user to recover the equipment via network IP. > Reduce manpower and travel costs by negating the need for staff to actually be at the equipment location, improving uptime and productivity.
- POWER MONITORING VIA NETWORK & LOCAL METER > Our remote network monitoring Allows remote monitoring via the free Graphic User Interface (GUI). > Provides local current monitoring via MiniBoot blue LED ammeter. > Allows user to establish the remaining capacity prior to adding a new device to the MiniBoot, plus displays the current being drawn and receives threshold alerts remotely.
- REMOTE MANAGEMENT > Simultaneous access via web IP power switch GUI. > SNMP V2 / V3 integration to DCIM. > Remote management protocols: HTTP(S); SSH Command Line Interface; Telnet; SMTP; IPv6/IPv4.
- ALERTS / ALARMS > Receive alerts via SNMP, email (SMTP), and syslog when predefined thresholds are exceeded for both MiniBoot and environmental sensor events. > Common SNMP MIBs (Management Information Base) for all MiniBoot models. Sensors & Wi-Fi > Variety of optional sensors: Temperature & Humidity, Temperature, Smoke, Door. > Option to connect via a Wi-Fi kit (IPD-WIFI) complying with 802.11 g/n/ac.
Fast Delivery
Swift shipping solutions
100% Protected
Guaranteed Total Security
Online Payment
Seamless Digital Transactions